Official Forum

don't use smartphone app...

to check if is' an hardware problem try to control with a compatible bike computer, like garmin edge or similar, or by pc

sì

Thanks again for your reply - the locknut screws in correctly. The issue is that when I start to use the turbo there is too much friction between the locknut and the frame of the bike - this means that the pedals won’t turn smoothly and eventually the locknut comes undone. If I loosen the quick rel...

chadwickwilliamso wrote:Thanks for reply. No spacers for 11-speed, 2 for 9-speed. It seems the lockring is jamming against the inside of the frame and that’s what is undoing it…

did you try to screw-in the locknut without the cassette installed? you have not to tight it, only to see if it screw-in correctly

Hi, on both an 11-speed quick release bike-and-set-up and a 9-speed quick release bike-and-set-up my Suito is unlocking the lockrings so that the cassette comes apart (regardless of how tight I fasten the lockring. What am I doing wrong? Thanks! did you add the spacers on the freewheel before insta...

Another topic: I read in other threads how you - like me - had troubles with the Suito calibration process. Update the firmware to the lastest version. Now the calibration works perfectly! I used the Suito only once this winter, one week ago, and I check for firmware update with Upgrado app, but th...

Hi red, this makes sense... it is exaclty what I observ. I have a Precision 4iii in my bike, a crank-powermeter. I connected it to my-Etraining using PML. It is recognized when I start the programm (the icon powermeter goes green). Anyway it is a strange behavior. Do you know, how to get rid of thi...

Hi,
you didn't came in the case of the so called "downward spiral" where:
1 power increase
2 you cannot afford it so you reduce spin speed
3 the trainer read a lower power so increase the brake level
4 back to point 2

you read the power from the trainer or from the powermeter on the bike?

Dear Elite team, I've just bought Favero powermeter pedals, and tested with the 2020 Suito, Upgrado says that firmware has the last revision. I've calibrated both just before the recorded training, after 10 minute of spin at 120 W. Results are really different, with Suito power 10% lower than Favero...

Hello everyone, my issue in a few words ... the resistance while using zwift is extremely high (on flat routes) and this happened from one day to the next. On a flat route in the easiest gear, it feels like stepping up a mountain (very high resistance!). Changing into a higher gear makes it even mo...