Kura auto risestance
Moderators: Elite Admin M, Elite Admin S
-
- Posts: 3
- Joined: Tue Sep 26, 2017 5:04 pm
Kura auto risestance
My kura is always on the highest resistance and it doesn't go down and i have to put 745 watt to reach 30km/h on myE training app
- Elite Admin S
- Posts: 2776
- Joined: Tue Nov 08, 2016 10:18 am
Re: Kura auto risestance
Hi
As you can see from the image below, the power curve of Kura grows up very quickly.
At 30km/h the power should be at around 450-500W, but at 35km/h it is already at 700-800W.

So, are you sure you were at 30km/h and not a little more?
If you're sure of it, can you tell me if you feel some slipping or if you hear some strange noise?
A good test to do is this:
- do a 10 minutes warm up
- open the advanced settings in the app and select calibration
- complete the calibration procedure
- do again a training and try to keep your speed costantly at 20km/h
Please let me know the power you develop at that speed.
Regards
As you can see from the image below, the power curve of Kura grows up very quickly.
At 30km/h the power should be at around 450-500W, but at 35km/h it is already at 700-800W.
So, are you sure you were at 30km/h and not a little more?
If you're sure of it, can you tell me if you feel some slipping or if you hear some strange noise?
A good test to do is this:
- do a 10 minutes warm up
- open the advanced settings in the app and select calibration
- complete the calibration procedure
- do again a training and try to keep your speed costantly at 20km/h
Please let me know the power you develop at that speed.
Regards
-
- Posts: 3
- Joined: Tue Sep 26, 2017 5:04 pm
Re: Kura auto risestance
I devolved around 160 watt at 20km/h
- Elite Admin S
- Posts: 2776
- Joined: Tue Nov 08, 2016 10:18 am
Re: Kura auto risestance
That seems correct
-
- Posts: 3
- Joined: Tue Sep 26, 2017 5:04 pm
Re: Kura auto risestance
After calibration it seems good and correct .. thanks for your help
Who is online
Users browsing this forum: No registered users and 31 guests