Misuro B+ and Nova Force 8

[kreutzer.daniel]

Hi there,

I do have Nova force 8 and an Misuro B+, I am wondering how many led blinks I do have to setup? I read sometime 1 or 12 which one is correct?

I am using a 700 / 28c tire and would like to use the zwift app. Someone know how to set it up in the right way?


Thank you and appreciate your help.

[Elite Admin S]

Hi

One flash is the correct setting.
You don't have to set a circumference value as the speed is calculated on the roller rotations (not on wheel rotation)

Regards

[kreutzer.daniel]

Oh OK thank you.
This means I do not have to chose the wheel size I need to chose the circumference of the roller?

Where can I find the circumference of the roller?


Thank you very much

[Elite Admin S]

Our app and software automatically set it, so you don't have to insert it.

Regards

[danieboerger]

I have the same problem here.
My Misuro B+ will not connect to the app, even though it is set to one flash. I connect the home trainer, select bluetooth and begin to pedal, but nothing happens, not even after 5 minutes of pedaling. I tried it with my iPhone and iPad, even disconnected all other bluetooth-devices. Nothing. iPhone is an iPhone 7 on iOS 14.3, iPad 6. generation with iPadOS 14.4. What could be wrong? The Misuro isn't even visible as a device in the phones bluetooth setting.

Thanks in advance,
best wishes,
Daniela

[drumazza]

Same problem here. No signs of connection. Is there any support we can contact?

[hug.deiber]

I have the same probleme too

[Elite Admin S]

Hi guys

If you cannot connect with the misuro:
- check the number of flashes set in the misuro
- check the position of the misuro (orientation is important)
- check the battery charge level

Also, if you connect using bluetooth on a smartphone/tablet:
- check to have both bluetooth and position (gps/localization) active

If you can't connect using a pc/Mac:
- open the bluetooth menu of the pc
- check if the trainer is paired on the menu
- if it is so, unpair it!
- run my e-training

If still you're having issues, contact the customer care at [email protected]
Regards