Hi there,
I bought my Suito-T in December and installed a Shimano 105 R7000 11 Speed (11 / 34 / CS-HG700).
The bike is in real good state (Canyon EDR AL DB 7.0 18 L bk).
I keep having an issue with the chain and the cassette though. It keeps making a noise when the chain comes off the cassette as if it clicks loose. I've perfectly aligned the rear derailleur and tried going back an forth a bit w the indexer but to no avail.
I found exactly the same issue w the same Smart Trainer somewhere online but no solution was given:
-https://bicycles.stackexchange.com/questions/65215/chain-cassette-noise
I thought it was maybe the cassette installation on the freehub but it can't be that either. It was suggested that I should install the cassette w the 1.85 spacer that comes with it but I try this, the cassette will remain which is not a solution.
I'm out of ideas. Please help; I just want a smooth running trainer
Weird ticking sound when chain leaves rear cassette
Moderators: Elite Admin M, Elite Admin S
-
- Posts: 1
- Joined: Sat Jan 30, 2021 10:08 pm
-
- Posts: 2
- Joined: Fri Feb 05, 2021 2:21 pm
Re: Weird ticking sound when chain leaves rear cassette
Hi, I just got the Direto X and put a Shimano 105 10 speed on. There was a horrible grinding sensation and loads of noise from the chain/cassette. I managed to improve the situation by:
1. Taking off the derailleur and giving it a thorough clean.
2. Re-indexing the system
This made it a little better but the problem was still there. So...
3. Put on a new chain to go with the new cassette. This made all the difference and it's now lovely and smooth.
Hope this can be some help...
1. Taking off the derailleur and giving it a thorough clean.
2. Re-indexing the system
This made it a little better but the problem was still there. So...
3. Put on a new chain to go with the new cassette. This made all the difference and it's now lovely and smooth.
Hope this can be some help...
-
- Posts: 1
- Joined: Fri Mar 19, 2021 6:48 am
Re: Weird ticking sound when chain leaves rear cassette
I had a ticking/clicking issue with the chain. Turned out to be a bend missing link, catching on one of the casette teeth every couple of revolutions. After replacing that, all good.
Who is online
Users browsing this forum: No registered users and 6 guests